Mullen Burst Strength Data

	Style 1260	Style 1265
1/16" thickness over a 2" opening	150 psig	650 psig
(1,6 mm over a 50,8 mm opening)	(10,7 kg/cm)	(46,4 kg/cm)

Synthetic Sheet Packings

Styles 1175, 1180, 1190

INDUSTRIAL Brand synthetic elastomeric packings are available in sheet form in three popular compounds. Synthetic Butyl, Silicone and Viton are all of the highest quality and are available in standard 36" x 36" (95 cm x 95 cm) cut sheet form. Specifications and available thicknesses are:

Style#	Compound	Shore "A" Durometer	Thicknesses Available
			Color	1/16"(1,6mm)	1/8"(3,2mm)	1/4"(6,4mm)
1175	Syn.Butyl	60 +/- 5	Black	x	x	x
1180	Silicone	60 ± 5	Red	x	x	x
1190	Viton-A	70 ± 5	Black	x	x	x

Style 1184

Style 1184 is 64 durometer black PVC gasket is particularly suited for use as gaskets and rupture disks on CIO2 stock towers in the pulp and paper industry. It is highly resistant to attack by either CIO2 or CI2 gasses between -5°F and 165°F (-20°C and 74°C).

Specifications (based upon 1/16" thickness) for Style 1184 are:

Tensile Strength	Elongation	Durometer (Shore A)
2250 psi	350%	64 +/- 5

Standard sizes: 24" x 24" (61 CM x 61 CM) and 44" x 52" (1,3 M x 1,5 M)Standard thicknesses: 1/16" (1,6 mm), 1/8" (3,2 mm), & 1/4" (6,4 mm)

Style 5000 TFE Gasket Sheet

This chemically inert commercial grade sheet is ideal for use in gasketing large surfaces when extreme chemical resistance is required and loading will be maintained to counteract the creep inherent is solid TFE sheet. Suitable for all temperatures up to 500°F (260°C).

For standard sizes and thicknesses, see Style 5001, below.

Style 5001 TFE Gasket Sheet

Style 5001 TFE gasket sheet is made from Virgin TFE and is used where electrical insulating properties are required in addition to the inertness of TFE.

Standard sizes: 24" x 24" (61 cm x 61 cm) and 48" x 48" (1,2 m x 1,2 m)Standard thicknesses: 1/32" (0,8 mm), 1/16" (1,6 mm), 1/8" (3,2 mm), & 1/4" (6,4 mm)

Gaskets

Style 50 TFE Envelope Gaskets
(Formed Shield)This design is used in larger gaskets (over 12" pipe size) to allow the sealing of flanged joints up to 30" pipe size and are made to size as specified by order.

Style 51 TFE Envelope Gaskets
(Slit Center)Our slit center TFE envelope gaskets are designed to provide a reliable method to seal harsh chemicals where flanged connections are used. A gasket filler is used to overcome the tendency of TFE to cold flow by providing a constant "push" on the TFE envelope. Since the TFE envelope is exposed to the fluid sealed, the gasket filler within is protected.
These gaskets are preferred for sealing flanged joints in CIO2 towers and Chlorine lines in pulp and paper bleach plants and as well as other areas.
All sizes for 150 lb. flanges are standard up to 14" pipe diameter. To order specify flange size by inside and outside diameter.

Style 53 TFE Envelope Gaskets
(Milled Center)Milled center TFE envelope gaskets are used wherever flow resistance at flanges must be reduced. A gasket filler is used to overcome the tendency of TFE to "cold flow" by providing a constant "push" on the milled TFE envelope. Style 53 is available to order in all standard 150 lb. flange sizes up to 12".

Style 52-S Synthetic Manhole/Handhole Gaskets

STYLE 52-S is die cut from a specially compounded steam resistant synthetic rubber sheet, it is the ideal replacement gasket for manholes, handholes and inspection ports on heating boilers, tanks and other vessels such as dryer rolls and steaming vessels in the pulp and paper industry where temperatures do not exceed 350°F (180°C).

All standard sizes are available and are 1/4" (6,4 mm) thick. To order Style 52-S:

1. Supply Style Number
2. Supply dimensions A x B x C where:
   A = long inside dimension
   B = short inside dimension
   C = gasket width
3. Supply shape: - see right:

Not shown: Round (dimension A = B)